Small compact and fun, the Bluetti EB70 portable power station from PowerOak may be but it packs a serious punch. With a capable 1000W of power output and a 716Wh battery its perfect for charging your small electrical devices or a backup power supply in case of power failure at home.
With the 716Wh LiFePO4 battery pack and built-in MPPT charge controller, the Bluetti EB70 enjoys 2500+ life cycles. You only need to plug it into a normal house socket for 3 – 4 hours to be 100% charged. The Bluetti EB70 solar generator is the perfect companion on your outdoors adventures such as camping, caravanning, boating, fishing, festivals and more besides. Plus, it can be used to power household appliances like LED lights, TV’s, mini fridge, and various electric tools (electric appliances with rated power under 1000W).
Wireless Charging Capabilities of The Bluetti EB70
Take advantage of the wireless charging pad on the top of the Bluetti EB70 battery pack. Simply pop your wireless capable device on the charging pad to charge the device. Wireless charging supports 5W, 7.5W, 10W & 15W charging speeds. Plus, there are 4 x USB-A ports and 2 X Type-C output 100W max.
Built In Pure Sine Wave Inverter Technology of The Bluetti EB70
The built-in pure sine wave inverter provides more safer and stable electricity to power devices like laptops, mini fridge, TV, CPAP and more. It has two UK standard AC outlets and can power 1000W small appliances.
How Can You Charge The Bluetti EB70
There are 4 ways you can charge the Bluetti EB70 solar generator, by AC mains (wall socket), solar panels, 12v car charger & generator.
- AC Mains fully recharges is 3 – 4 hours
- Solar panels 3 – 4 hours using 200W Solar Panels simultaneously with full sun
- 12v car charger charging takes 7 – 8 hours
- Generator (200W) 3 -4 hours
Light Weight Portable Power
At just 9.7KG the Bluetti EB70 is light enough to take anywhere you want to go. The fold up space saving handle make carrying and storing a breeze especially if space is limited on a trip or in your cupboard.
What’s In the Box?
Bluetti Generator EB70, AC Adapter & Cable, Car Charging Cable, Solar Charging Cable (DC7909 Male to MC4, Warranty Card, User Manual
FAQ
Q1. What kind of devices can Bluetti EB70 power?
A. For EB70, the maximum output power is 1000W, so please make sure the total power of your devices doesn’t exceed 1000W, or the inverter will shut down itself.Friendly
Note: For some devices with motor/compressor built inside, the instant start-up power maybe 2-4 times more than the rated power, which may exceed the upper limit of the EB70.
Q2. How long will EB70 power my device?
A. Working time = Working time (estimation) = (716Wh*0.85) / operating power of your device. Please note that the actual working time may vary under different environments.
Q3. What kind of solar panel can the charge the EB70
A. The solar panel must meet:1) Open Circuit Voltage (OCV) between 12V-28V;2) Equipped with MC4 Connector.
If your panel has an Anderson connector, please purchase Anderson to MC4 cable separately.
Best Companion:1*BLUETTI SP200 (200W), fully recharge from 0-100% in 3.5-4 hours.1*BLUETTI SP120 (120W), fully recharge from 0-100% in 6-6.5 hours.
Note: The actual charging time depends on the weather, solar condition, and the angle of the solar panels.
Q4. Can the EB70 charge and discharge at the same time?
A. Yes. It is not highly recommended for better battery protection,but with the premium built-in LiFePO4 battery and the advanced Battery Management System,please rest assured and use it the way that better suits your needs. But please note that this unit cannot be used as a UPS.