Excel Power XL80WP 3” Water Pump + Hose Kit 5M

When water moves from being a resource to a liability, whether it’s a flooded cellar after a storm or the need to drain a large pond for maintenance, you need more than just a piece of machinery; you need a complete solution. The Excel Power XL80WP 3” Petrol Water Pump + Hose Kit is designed to be exactly that.

At Hampshire Generator, we understand that a water pump is only as good as the connections that carry the liquid. That is why this package seamlessly merges the high-performance XL80WP water pump with a professional-grade 5-meter hose kit. By combining a powerhouse petrol water pump with precision-matched suction and discharge lines, we’ve eliminated the guesswork. From the moment you unbox this unit, you have a synchronized system ready to tackle high-volume water transfer with ease.

Command the Flow: 3” Clean Water Discharge Powerhouse

The heart of any serious 3 inch petrol water pump is its ability to move mass. The Excel Power XL80WP boasts a commanding 3” clean water discharge, making it a true powerhouse for moving large quantities of water with precision. Unlike smaller units that struggle with friction loss, the 3-inch diameter allows for a massive volume of water to exit the pump housing with minimal resistance.

Whether you are using it as a garden water pump to irrigate a large landscape or as a high-speed water transfer pump to fill industrial-sized tanks, the 3″ outlet ensures that your job finishes in a fraction of the time. This isn’t just about speed; it’s about the precision of flow, ensuring that even when the water is being moved over distance, the pressure remains consistent and the engine remains efficient.

Unmatched Performance: 912 Liters Per Minute Capacity

When time is against you, especially in emergency drainage scenarios, performance metrics are the only thing that matters. This drainage pump features a debris size capability of ≤5mm, ensuring that small particulates commonly found in cellar water or pond silt won’t clog the internal impellers.

The technical specifications speak for themselves:

• Discharge Capacity: A staggering 912 liters per minute.
• Total Head Lift: 30 meters, allowing you to move water up steep inclines or out of deep excavations.
• Suction Head: 7 meters, giving you the “pulling power” needed to reach water deep within a basement or at the bottom of a trench.

This combination of lift and flow makes it one of the most versatile tools in your arsenal, capable of acting as a heavy-duty pond pump one day and a life-saving emergency extractor the next.

Mastering the Setup: How to Prime Your XL80WP 3-inch Water Pump

One of the most common questions we get at Hampshire Generator is, “Why isn’t my pump moving any water?” Nine times out of ten, the answer is priming. Even a high-performance petrol water pump cannot move water if the internal chamber is full of air. Centrifugal pumps like the XL80WP are designed to move liquid, not air; air is compressible, while water isn’t.

To get your 3 inch petrol water pump operational, follow these simple steps to ensure a perfect prime every time:

1. Check the Seals: Ensure your 5M rigid PVC suction hose is attached using the provided plated steel clamps. The connection must be 100% airtight. If air leaks in, the vacuum will fail.
2. Open the Priming Port: Locate the cap on the top of the pump housing (usually near the discharge outlet).
3. Fill it Up: Pour clean water into the pump chamber until it is completely full. This water creates the necessary seal for the impeller to start drawing water up through the suction hose.
4. Seal and Start: Replace the priming cap securely. When you pull the recoil start on the 209cc engine, the spinning impeller will immediately begin to push that internal water out, creating a vacuum that pulls the “new” water up from your source.

Built for the Elements: Robust Protection Frame

A petrol water pump is often required to work in less-than-ideal environments, muddy construction sites, slippery riverbanks, or cramped, damp basements. To ensure the XL80WP survives these rigors, it is housed in a robust protection frame. This sturdy frame not only enhances the pump’s longevity by keeping sensitive engine components off the ground but also provides a shield against potential impacts or rough handling.

The wrap-around design serves a dual purpose: it acts as a roll cage for protection and provides multiple points for secure tie-down during transport. When you’re in the middle of a flood recovery operation, the last thing you want to worry about is a bumped fuel tank or a snapped valve. This frame ensures the pump stays operational when you need it most.

Portable Power: Lightweight 25kg Design

Despite its heavy-duty output, the Excel Power XL80WP is remarkably agile. It weighs in at 25 kilograms, which allows for ease of handling and transport without compromising the pump’s overall robustness. This “sweet spot” in weight means a single operator can comfortably lift the unit out of a van and position it near the water source without needing a second pair of hands.

In the world of water transfer pump technology, being “portable” often means sacrificing power, but here, the balance is perfect. The 25kg build is heavy enough to remain stable and vibration-free while running at full throttle, yet light enough to be a go-to tool for mobile contractors or homeowners.

The Heart of the Machine: 209cc Recoil Start Engine

Reliability starts with the engine. The XL80WP is powered by a powerful 209cc recoil start engine that has been engineered for “first-pull” reliability. To support long-duration tasks, it comes with a generous 3.6-liter fuel tank, providing an approximate working run time of 1.3 hours at significant load.

This engine is the “brawn” behind the 3 inch petrol water pump, providing the torque necessary to maintain high flow rates even when the total head lift is pushed to its 30-meter limit. The overhead valve (OHV) design ensures the engine runs cooler and more efficiently, extending the life of the machine and ensuring that your water pump is ready to go every season.

The Complete Connection: 5M Professional Hose Kit

A pump is useless without a way to get the water in and out. This kit includes a high-quality 5-metre rigid PVC spiral suction hose and 5 metres of high-quality Lay Flat discharge hose.

• The Suction Side: The rigid PVC spiral hose is designed to withstand the vacuum pressure of the 7-meter suction head. Unlike standard hoses that might collapse under the “pull” of a 209cc engine, this spiral-reinforced hose maintains its shape, ensuring a constant, unrestricted flow of water into the pump.
• The Discharge Side: The 5m Lay Flat hose is the ultimate space-saver. When not in use, it rolls up into a compact disc, but once the 912 L/min flow hits it, it expands into a heavy-duty conduit.
• The Secure Fit: To bridge the gap between pump and hose, the kit includes 2 x 76.2-79mm Plated Steel Clamps. These are heavy-duty bolted clamps designed to provide a leak-proof seal on the 3” ports, ensuring that every drop of water goes exactly where you want it.

Why Choose the XL80WP Kit?

Whether you are a farmer needing a reliable garden water pump for irrigation, a homeowner needing a pond pump for seasonal cleaning, or a contractor in need of a rugged drainage pump for site work, this kit delivers. The Excel Power 2-year warranty provides peace of mind, knowing that you are backed by a brand that stands by its build quality.

The synergy between the 209cc engine and the included 5m hose kit means you don’t have to spend hours searching for compatible fittings. We have done the engineering for you, simply clamp the hoses, fuel up, and take control of your water management.

What’s In the Box?

Excel Power XL80WP 3” Water Pump, Hose bands, 2 couplings, User manual, 5 metres of high quality PVC suction hose, 5 metres of high quality Lay Flat discharge hose, 2 x 76.2-79mm Plated Steel Clamps.